I am adding the Extra Button Panel to my BB1 and wanted to make sure I was connecting everything correctly.
I have included a picture so hopefully it will help.
Here is how I have it connected:
From the Extra Button Panel , connect the ribbon cable to animator board.
From the animator board, connect the RJ45 cable to the SPN 1 Out on the hub.
From the Hub, connect the SPN In 1 RJ45 cable to the WMS BB1 mainboard and also connect the DC power cable from the hub to the mainboard.
Hopefully everything looks correct
Does the animator board get its power from the RJ45 or does it need additional power?
I am not sure what the small LCD board is for and where is goes.
Thanks for all of your help,
Steve