61 loop

[leow]

Hello

For first, i want to say I spent almost whole weekend to read this forum 
But have some questions anyway...

I got my first slot machine - Trople Diamond
As always, i had 12 error and dead battery. After replace it, 61 code and loop.
And how i understand, i need to clear it!?

Also i have a bill validator, but it disconnected now (power wire and main cable disconnected).

For begin i want at least to do my machine work.

My question:
1 can i find microprogram for Clear Chip?
(I live in Ukraine, and if i will to buy it on Ebay or somewhere else, i'll need to wait it 3-6 weeks or more )

2 what i need else to run BV (set chip, etc.)?

Thank you all!

[therockinelvis]

When you say your in 61 loop, are you pressing the test button and it changes to 61-1? If yes, are you then closing and latching the door and turning the jackpot reset key? And if yes, does the display go blank for a few seconds and then go back to 61? If all questions are yes, then you are in the "loop". You will need a clear chip for that. It is usually easier to get clear and bv set chips together. A short video of what it is doing would be great.

[leow]

Yes yes and yes again...

1 Turn on
2 got 61
3 press the test button and it changes to 61-1
4 close the door
5 press reset button
6 blink "insert coin" and "coins played" 2 times each
7 got 61 again

[therockinelvis]

Definitely the "LOOP" I have read about some people being able to put a different SP chip in to trick the MPU and thus kind of clearing. A shame that no one in the Ukraine sells the chips you need.

[leow]

Definitely the "LOOP"...

Yes... I read 2 days this forum, before asked this question.

...A shame that no one in the Ukraine sells the chips you need.

Unfortunately, there is absolutely no slot machines market.

So anybody can give or sell me the binary files of Clear and Set chips?

 

[slots4home]

Here is one thing I would try if you cannot get the chips you need
Pull the cmos chip and replace after 10 seconds and then try the 61 then 61-1
It might work

[leow]

Pull the cmos chip and replace after 10 seconds and then try the 61 then 61-1
It might work

nothing... it's not helped.
all the same

[leow]

thanks to all
i bought the bin files
will upd a little later

[leow]

Many thank to all!
This is a very cool forum 

As i told before, i bought a bin files and burn Clear Chip today.
Did a reset and my slot machine is works now.

But a have an other problem...
41 error

But after a few right hand spins only. With spin button all work good.
I start a new topic with new error.

[therockinelvis]

41 is the far left reel. Check to see if it is touching something. Opening and closing the door will clear the code unless it is still rubbing.