Author Topic: Bulb for WMS Topper (Read 3203 times)

sbsgroup · « **on:** February 25, 2019, 06:01:26 am »

I am looking for one of these odd bulbs for a WMS topper. PM with info and price.
Thanks
Bobby

rickhunter · « **Reply #1 on:** February 25, 2019, 11:00:28 am »

Suzo happ used to have them, but they were expensive. I had a bad one, it was cheaper to buy another topper than buy the bulb, at least it was when I went looking for it. I can no longer find the part at Suzo Happ though.

sbsgroup · « **Reply #2 on:** February 25, 2019, 11:44:59 am »

Checked with Happs couldnt find one, what a stupid design! You cant find that one at Home Depot

rickhunter · « **Reply #3 on:** February 25, 2019, 01:38:24 pm »

Yeah, you will get no argument from me about that! LOL

markb7605 · « **Reply #4 on:** February 25, 2019, 04:15:24 pm »

ill look at work tomorrow we have a few toppers like that in scrap pile ill see if we have a good bulbs

buzzarama · « **Reply #5 on:** February 25, 2019, 10:34:20 pm »

It is a type 4 trapezium ccfl. Coin Mechanism is who I used to get them from but I had an account then. I'm not sure if they sell to individuals or not. I had gotten a topper one time that someone used a tube style ccfl in place of that with the same inverter, kind of retrofitted it in there.

Patriot gaming sells them from time to time, which is who Scientific Games (Bally, WMS) refers you to when asking about this bulb (PN 24-019180-00-00)

sbsgroup · « **Reply #6 on:** February 26, 2019, 05:54:22 am »

They dont list them at this time, thanks for the heads up.

Badbaud · « **Reply #7 on:** February 26, 2019, 06:54:04 am »

Why not convert to a LED tube?

sbsgroup · « **Reply #8 on:** February 26, 2019, 07:18:32 am »

That would be the best way, have you done it do you know what you need to get it done.

thanks

Badbaud · « **Reply #9 on:** February 26, 2019, 07:44:43 am »

No, but I have seen bendable ropes of bright LED's that could form fit to the glass tube shape.
Saw one at a bar used to light up the rows of bottles under a shelf.

Very bright, you could see all of the dust and fingerprints.

Jim · « **Reply #10 on:** February 26, 2019, 07:51:22 am »

Very easy to do !,, need two or three foot of 4040 Super Bright LEDS, I buy these from Super Bright LEDs in Ohio, they are able to be cut to length, they use their own power supply for power usually 12 vdc, if the Williams machine has that available then you can tap into it. the strips have an adhesive back on them, so you can place them anywhere. not expensive.

Jim

sbsgroup · « **Reply #11 on:** February 26, 2019, 07:57:30 am »

Thanks Jim for the info good advice.

markb7605 · « **Reply #12 on:** February 26, 2019, 11:31:02 pm »

i have a few bulbs i just need to dig them out and test

buzzarama · « **Reply #13 on:** February 27, 2019, 01:00:18 am »

Quote from: markb7605 on February 26, 2019, 11:31:02 pm

i have a few bulbs i just need to dig them out and test

Mark, if you have one after Bobby gets his put me down for one please.

David

sbsgroup · « **Reply #14 on:** February 27, 2019, 05:48:37 am »

Let me know thanks for checking hope you have luck finding some good ones.
thanks
bobby

sbsgroup · « **Reply #15 on:** March 06, 2019, 08:49:32 am »

Have you had a chance to look and see if you had a good bulb? Thanks for your help.
Bobby

markb7605 · « **Reply #16 on:** March 06, 2019, 10:44:28 am »

i havent yet i have several but have a few big orders i have to get done first ill try to test a few on sat.

sbsgroup · « **Reply #17 on:** March 06, 2019, 12:01:44 pm »

I understand and dont blame you, thanks for checking.
Bobby

markb7605 · « **Reply #18 on:** March 12, 2019, 08:22:58 pm »

haven't found any good ones most have been in pieces but ill keep digging

News:

NLG Site Navigation Menu

Author Topic: Bulb for WMS Topper (Read 3203 times)