Any videos for replacing reel glass?

[Simple Sam]

I just got a new set of glass for my 742A.  I saw the video on youtube (thanks ballyslotsballyslots) on how to replace the belly glass and successfully replaced that glass.  Although the video title indicates it covers reel glass, it doesn't.  Are there any videos that help with this?  I looked at the parts diagram in the Bally 400 manual but it wasn't very helpful.  There are a lot of screws in that area of the door so I don't want to unscrew the wrong ones!

[Amechanic]

Top bezel is not hard. Two screws in the top left and right corners. Then I believe there is a max of 4 screw across the bottom edge. The screws are about 1” long. There are other screws across the same area that are used to hold the top and bottom door casting together. Those screw are shorter, about 5/8-3/4” long. Reason I say 4 max screw across the bottom, is that most Machines have only 2-3. When all screws are removed you just lift up and forward, because the top bezel sits on top of the upper door casting.

[Simple Sam]

Thanks, that was easy! I had seen the four (3 installed) screws on the bottom but was unsure of the top. Game looks great with new glass.

[Amechanic]

Glad to help. Maybe you could make a video on how to remove the top bezel. I would but that runs into my stupid zone on how to do things. 🤪😂 I’m just not comfortable doing videos.