s2000 link progressive harness help

[Mirage_Chaser]

Hello all. I am trying to link two hot pepper games to create a link progressive.

Can someone provide me with a pinout for the harness? Specifically on the s2000 side.

Right now I have it so Serial Return is pin 1, common is pin 2, and machine specific is pin 3. I have them running into a 6 pin connector. Is that correct? And if it is, am I supposed to connect it right to the mother board or to the comm board on the power supply?

I ask all this because I set it up and I am still getting progressive link down.

On the PSP both F4 and F8 are set to 08 and it set for JP0.

The machine is set for link progressive level 1 and the sas group is 0(not sure if that matters as it is not a sas progressive).

Edit: Oh yeah it is on a con 2.

[qbert]

Hi Mirage
Have you read through http://newlifegames.com/nlg/index.php?topic=462.msg1451#msg1451

This should help you with you set up also check the download page for a con2 manual.
For S2000 you will need a con2i.

What are you using for display? Chami or supreme?

Rich

[Mirage_Chaser]

As that is for PE+ games and the pinouts are different no I did not look through that.

For display I am using cham 2's.

Yes it is a con2i.

I do have the con 2 manual but it has only the old style igt connectors. Nothing for S2000 or I game.

[Harp]

See attached

[Mirage_Chaser]

Thank you harp.


I guess that means I should use the connector on the mother board?


Also excuse my ignorance but does not clear it up 100%, does that mean that machine specific is pin 1 and serial return is pin 3? And then what do I use for common?

[Harp]

 IGT Vision Comm Board to CON2I Harness Connections 

IGT 6-pin	CON2I	Function
Pin 1	J3 Pin 1	Progressive in (Orange)
Pin 2	J1 Pin 1	Ground (Gray)

 

Pin 3

J1 Machine Select

Progressive out (White)

   

[Mirage_Chaser]

Ok. Must be a different issue because my harness was correct. I still have progressive link down.

[Harp]

Also try MS04 which is no cycling and not 08

NOTE:No Cycling is recommended for use with IGT machines

[Mirage_Chaser]

Ok some progress.

The Mikohn was removed from a set of working S+ machines so I thought it was in working order. Apparently the S+ games worked without the serial return fuse being good. When I changed it and built a single machine test harness I was able to get the game to work.

Additionally I got it to work with it to MS05. Not sure if that matters here but it is working.

[Harp]

    See attached for MSxx settings