I got a "No Signal" on both WMS BB2 LCD screens this morning.

I pulled out the MPU from the machine and threw it into my bench tester.
Removed the cover, took a look inside the MPU, removed the SSD/holder from it's plastic mount.
Only to discover that the video driver board is cooked...it was brown as dead grass!

The fix...>>>
Replaced with another old video card (These rarely come brand new).
All is well.
What caused it to burn out? Age?
No...A bad MPU fan was not drawing in any air.
Without it, the video card HAD to overheat.
I then replaced the fan as well.
Short video I made...sorry it came out sideways...lol...>>>
https://www.youtube.com/embed/egEe23m2khU?si=LYK4J-cW-CzmbcYU