Mk6 tiki torch reels blank after clear set

[leocat168]

Hi all
Had a tiki torch that a friend on here was helping me do a clear and set because the bill validation was not working
We did the clear and set .. but upon loading one of the times, the game came up but the reels were blank.. we never got to finish the set up.. I'm not sure if the problemnis from the clear/set, or unrelated.. any ideas?
Thanks
Al

[leocat168]

Hi went into the menu and see pictures below for what are errors
Weird that one time I turned in the game the reels showed up. But not again since
Help....
Thanks
Al

[Heihachi_73]

Looks like it was completely wiped rather than just RAM-cleared. Or something in the EEPROM corrupted itself so the machine nuked its own settings for safety. if it was fully cleared and then set up it's probably just a wrong setting somewhere.

Either way, you will need to run the setchips and set everything up (again) e.g. jurisdiction, set the number of lines to 9 or 20 lines depending what you want (Tiki Torch allows both), max bet setting (e.g. bet multiplier of 10, 20, 25, 50), variation 99/1/2/3/4 (99 is the lowest RTP at 87%, 4 is the highest at 97%).

I don't know if it's like MK5 (aka MKV/MVP/540) where there's a jurisdiction menu which tells you what's wrong, that used to be the cheat sheet when things weren't right.

[leocat168]

Hi
Thanks for the reply.  I have tried doing the clear and set several times and believe I have the settings correct but I'll try again tonight
Thank you
Al