MEI Cashbox Handle Repair Kit

[stlscott]

Do you have an MEI Cashbox Handle where it just pulls out?  This is a known problem with the original design.  The Pin in the end snaps off from pulling the handle in and out.  We designed a SUPERIOR end to the handle.  Our design is improved over the original and provides an almost "METAL" like strength with a reinforced in-house design.

This Kit includes 2 end pieces.  This kit does NOT include the yellow rubber part, this is for the ENDS that go over the rubber part.  You must also have the original screws (we do not include screws or the rubber handle part).  Cashbox is also NOT included

Cost for 1 pair is $10, volume discounts available.

TO install:
1.) Remove the two screws holding the handle in place, on each end
2.) Replace each end with our handle housing upgrade
3.) Move the rubber handle in and out to make sure you have a good fit
4.) Enjoy a working cashbox handle once again!

Picture of the cashbox shows what the original handle looked like.  Ours replaces those parts.

We offer the handle repair kit in Yellow as well as black, just send a message if you prefer yellow.

[stlscott]

Here it is on the cashbox and also available in Yellow

[way2fast4u]

Hello Could I get A set of the yellow ones

[stlscott]

Hello Could I get A set of the yellow ones

PM Sent

[dahondaboy77]

mine literally broke after reading this hahahah guess ill be pm'ing you.

[stlscott]

mine literally broke after reading this hahahah guess ill be pm'ing you.

Sorry your handle broke, we started making these because so many handles were breaking and we were stealing from others to make good boxes... looks like good timing

PM sent

[stlscott]

Bump

[stlscott]

STILL and always available!  Send me a PM!

[stlscott]

Repair that cashbox handle.

We also have a repair kit for iVizion cashboxes too!

[stlscott]

bump