WTB Plug and Play Game King Kit

[mach]

Have an i-game Lucky Larry's Lobstermania.  Round top with LCD.


Looking to convert to a video poker machine.  Want to get a complete kit with glass and board to make it an easy swap back to Lobstermania if I want down the road.


I would presume Lucky Larry is a 3902 board but not 100% sure.  Also looking for the game king to be the newest version available for this cabinet.  Is that 5.3?

[Buzz]

You have been around slot machines long enough to know that you can't presume anything. Post a picture of the board.
 
I have the software and 3902 boards but all my machines are 19 inch. from your picture I think yours is a 17 inch monitor. ( NO glass )

[GameKingSlots]

PM Sent.

[mach]

Here is the board I slid out on the tray.  Which version would it be?  Or do I need to remove the card on the right top of board as well?

[Buzz]

It's a 3902 board, with a simm MM II sound board.
 
Let me just toss in a little info. Some game sets will only have 1 or sometimes 2 PXL simms ( The game set you have pictured has 3 )  Also some game sets will have 4 Game eproms ( chips) In your picture you have 2. If you ever run across a set with 4 Game eproms, game 3 will install in socket U 14 and on the board it's marked as PXL 1  Game 4 installs in socket U 30 and is marked as PXL 2.
 
Game King 5.3 has (1) base chip, (4) game chips, (1) CGF simm ( installs below the sound board ) (1) PXL simm, and (1) sound simm

[mach]

It's a 3902 board, with a simm MM II sound board.
 
Let me just toss in a little info. Some game sets will only have 1 or sometimes 2 PXL simms ( The game set you have pictured has 3 )  Also some game sets will have 4 Game eproms ( chips) In your picture you have 2. If you ever run across a set with 4 Game eproms, game 3 will install in socket U 14 and on the board it's marked as PXL 1  Game 4 installs in socket U 30 and is marked as PXL 2.
 
Game King 5.3 has (1) base chip, (4) game chips, (1) CGF simm ( installs below the sound board ) (1) PXL simm, and (1) sound simm

Thanks for the info.


I'd really like to just buy another tray(board) with the game king installed on it to make switching between games easier.  Wife not too happy with me trying to get rid of her Lobstermania 

[rslots]

You will want to install a bet 1 button where you have the blanking panel (next to cash out) on the far left in order to support the game king software.  And for the full effect and look you can also change the legends on your lower 5 buttons to " hold/cancel" and the upper right button to "draw/deal" which can be done in just a few seconds.