IGT I GAME (PLAY 1 PER LINE) BUTTON WONT LIGHT UP

[TOPDOLLAR777]

HELLO,

I'M NEW TO THE SLOT MACHINE GAME.

I HAVE AN IGT I GAME AND THE PLAY 1 PER LINE BUTTON WON'T LIGHT UP. THE BUTTON WORKS TO PLAY THE GAME BUT IT WON'T LIGHT UP. EVERYTHING BOOTS UP AND PLAYS CORRECTLY (NO ERRORS). I CHECKED THE BULB. I TRIED A 10 PACK OF BULBS. IT'S NOT THE BULB. I SWITCHED THE NON LIT UP BUTTON TO THE PLAY 2 PER LINE BUTTON WIRES AND IT LIGHTS UP AND WORKS PERFECTLY. SO IT'S NOT THE BUTTON SWITCH OR BULB. WIRING TO THE PLAY 1 PER LINE IS NOT PINCHED OR CUT. WHAT ELSE CAN IT BE? PLEASE IF ANY COULD ADVISE.

THANK YOU FOR YOUR TIME

[Tilt]

You can test the switches/lights in the Diagnostics Menus.  Press MPU button -> Diagnostics -> Inputs and Outputs Test -> Front Panel I/O test.  If it doesn't work in diagnostics try reseating the IO cards (turn off power first).  If that doesn't work you probably have a bad IO card and will need to replace it. 

[TOPDOLLAR777]

Tilt you're a genius. I reseated the io board on the door and it worked. Thank you for the help! 👍

[Tilt]

You're welcome, I'm glad you got it fixed! 

[rokgpsman]

Tilt you're a genius. I reseated the io board on the door and it worked. Thank you for the help! 👍

Good job!  

[Mandersen]

Tilt you're a genius. I reseated the io board on the door and it worked. Thank you for the help!

Good job!