mills golden nugget reel strips- are these correct?

[puckhead]

trying to get a golden nugget to pay out properly. i must state upfront its a repro, and i have no idea of the history, it was non working. with the index holes lined up, all the strip edges line up.   the strips are numbers left to right CH-1C , CH-2A , CH-3A.  is that correct??

also, the reel sprocket closest to the payout fingers is labeled. SG-1 . the other two have no labels. how can tell if those two are mixed up or not?

assuming the strips are correct, its there a way to start from scratch to make the payouts correct?

thanks

[puckhead]

the reel sprocket nearest the fingers is CH-1C, not SG-1.  not sure where i came up with that. there is a pic on the web of golden nugget strips. mine are the same expect the reel one, which is the right one in the pic.

when you install the strips, and line up the 3 holes, how do you know where the end of the strip should go on the reel? i know they should all be in a line, but where on the reel?

thanks

[puckhead]

forgot to post the pic from the internet of the golden nugget reel strips