Need working top box for IGT reel touch

[Plpslots]

I just need the top box I have the HD and Bios


Thanks all problem solved

[Plpslots]

Bump still looking please PM if you have 1 to sell

[tjlee]

PM Sent

[Haywire Slots]

The one you have should be just fine. Looks like you just need to replace some of the 1000uf 6.3v capacitors. Its a quick & easy job with minimal soldering skills (about 20 min.).

[Plpslots]

Ok can you tell that from the picture and how would I go about doing that ?

[cowboygames]

If the top of the cap is bloated, it's bad. Common problem on those boards

[qbert]

I'm not sure capping this box will fix it.
This box will go into the bios screens, save and reboot properly checks memory, IDs hard drive etc. It does everything correctly but the screen will go black after boot (as they normally do) but it will stop functioning at that point instead of going on to the reel touch series of blue screens. No it's not the hard drive or bios as they were installed in another top box and they work perfectly.   
I guess it would not hurt to try.

[cowboygames]

Maybe try swapping the RAM?

[Plpslots]

I will try these things and let you all know later in the week

[Plpslots]

I have tried changing RAM no change next onto the Cap's

[cp]

I have a couple of the reel touch monitor  assemblies...  been sitting on the shelf for  3 or 4 years...  don't know if they work...hate to sell ya something that I can't test / check.  If you want to take a chance and pay for shipping ... will sell them for $50  each + shippng