Needing a schematic for a Bally Superline 892-1

[Cruiser]

Hi Guys,
I am having trouble with the payouts on an Bally slot Superline 892-1 (EM)
I am wanting a schematic please can anyone help out
Cheers Cruiser

[Jon]

W1046-1033

That would be the right blueprint number I do not have the exact right one some of the supervisors used some of the same diagrams has the Super Continental

The 891 - 1
If you would like I can upload a copy of that diagram it is really close to what you have and if you read some of Jim's post on his 891 you will see he had similar issues there is also opposed on a bingo machine which is almost the same what issues are you having they may be simple for us to talk you through hack the last guy from Australia I talked him through rewiring an entire machine 50 phone calls 400 post on Facebook and a whole lot of chat time

[Cruiser]

Hi Jon,
Many thanks for your response.
I am unsure of the blueprint number.
All that I know is my machine is a Bally Super Line 892-1
I will take all the help i can get thank you very much. If you can upload that would be great
I will find Jim's post and read it.
Currently all other pays seem fine, its the cherry's on the first left reels


Cruiser

[Jon]

https://drive.google.com/folderview?id=0B7OIdMyIjQuMYXZSTFBjR216djQ


Can you post a picture of the payout glass  please

I always recommend printing out the blueprint have it laminated so you can draw on it and follow wires out it will be intimidating at first I think it is about 7 feet long it is the first diagram I got for these old machines kind of shocking when you look at all the fact everything on that was done by hand

[Cruiser]

Bally Super Line 892-1

[Jon]

Okay if that is the only problem is One Tree on the left side does not pay my first thought is you need to clean and service the real machine it is probably dirty if it is your first slot machine and you have never done one before I recommend you go to my Facebook page down probably 30 post R 2 videos the first video will show you how to service a real machine properly the guy is great he's a little long-winded but probably one of the best text I've ever met in my life he gave me permission to put them up on my Facebook page the files are around 5 or 6 hundred megabytes of peace I don't know what your internet access is they look good I'm up to about a 30 inch TV

[DavidLee]

Sounds like a dirty contact or an open in that circuit.
Old school low tech test. Set the cherry on the pay line, now nudge that reel slightly up and down. Doesn't take much, maybe 1/8 of an inch either way. This causes the wiper contact to ride over its opposing contact and possibly making a connection.


Note, this is a procedure I've used myself, but use your own judgment and comfort level when working on your machine as this isn't standard procedure.

[Cruiser]

Many thanks for the information and time to assist me, Thank you much appreciated.
I picked this machine up from an electrician, who I believe has mucked with the wiring ?? as we had found other issues in the past

The machine has been serviced and all so restored by an older technician who worked on them back in the day, he is very very good with EM's.
The wiper arms and contacts have been cleaned and adjusted this is not the issue he says, there is signs of fresh solder, he believes there are no open circuit wires.
I would like the schematic to check to ensure we have all correct wires in the right place.
thanks

[Cruiser]

Hi Jon, can you please upload your schematic for the 891
Many thanks

[Jon]

https://drive.google.com/folderview?id=0B7OIdMyIjQuMYXZSTFBjR216djQ

Here is the link again

If you go to my Facebook page it's there and the manual for the ballys em is there to