Hi all,
I need some help.
I have a 3.0 and the dongle farm is not either getting power or a signal. I am getting a touchscreen and printer error. I have tried the following
1. Main Power supply
2. Power supply on the cpu that powers the dongle farm
3. CPU
4 Backplane
All these were changed with known working ones and no avail. I checked the voltage from the cpu power to the farm and its good.
I also recognize that if the usb cable coming from the cpu to the farm is removed, the lights dont light on the farm
I also swapped all cables in and around.
Can anyone help me please. I have lost some hair with this one