The narrow at top and wider on the bottom Ceronix brackets would work Rick...thanks for pointing it out.
As a matter of fact...I'm making some right now as we speak!
I used to watch McGuyver!
Anyways, I took apart the LCD I bought for $15 on a Facebook Marketplace local seller...some guy that said he uses a laptop and has no use for a 22" monitor).
I drilled some small holes into the metal back panel ad fastened two angles 19-3/16" apart.
The angles fit precisely onto the metal clips in the topbox with a couple of short pins attached to the angles and slip right into the topbox holder perfectly!
I ran a VGA cable down to the top of the cheap Celeron BB2 MPU VGA output and pictured below is the finished result!
Short video...There was a leak in my workroom...roof is repaired with new membrane but I never got around to fixing the ceiling tiles yet! haha...>>>
https://youtu.be/o2y51VI0MNUClick on photo below to enlarge if needed...>>>