Good Afternoon,
I want to make a harness to connect from the J6 header on the motherboard to the 9 pin molex that connects to the JCM/WBA power supply. I would just need to know which wire goes to into which position at each end, or a schematic. The JCM is WBA/13 and I have the power supply with the two output connectors and 9 pin input. This machine never had a BV but I thought I would mess around and see if I could get one to work. Also need to know orientation of the 9 pin when calling out the positions since the power supply end does not state which position is number 1. Thank you.