17" Game King Monitor Shelf with 25 Pin Plug Cutout.

[Ash100]

I just recently aquired 2 NOS 25 Pin CRT Monitors for 17" Game King/I Game Cabinets and would like to use them.

I've got a few empty 17" Cabinets, but they were set up for the 19 Pin Monitors.

The Monitor Shelf is slightly different where the Beau Plug installs and the 25 Pin Plug/Harness I have won't line up with the opening/mounting holes.

So if anyone has an original Shelf laying around with the wider spacing, I'd love to take it off of your hands

I can even trade out the 19 Pin Harness and Shelf if you've got a machine that requires that configuration instead of the 25 pin.

Thanks,

Curtis ash100
 

[Simon Barsinister]

My workaround has been to use only one beauplug screw and being careful on initial 'slide-in'.  Done it many times.  However if you have OCD this will NOT work.

[ALIDMAN]

send me Pm brother , I can help you , don't forget you owe me one lol ALI

[Ash100]

Thanks for the inputs.

I was able to get it up and going by using Simon's workaround.

Just pulled out the tray, installed the Beau Plug with only the bottom screw then slid the monitor chassis into the tray so the plugs mated. I marked a spot to drill the top hole then secured the screw with a small nut.

Once everything was reinstalled into the cabinet, the monitor goes in and out as it should. Guess I was way overthinking it beforehand.

Thanks,

Curtis ash100