Need 2 IGT S parts metal back of front door & one small wire harness Please help

[mrcrazy]

First off I need the metal back plate that goes on the back of the door on an IGT S machine. I have some older fortune machines that im gutting & putting in S-plus stuff. Pic one show SORT OF what I need but the one pictured is for an s-plus...the one I need is longer and has metal tabs on the left (pic 3) and 2 holes on the right that screws go through. Without this I cant mount a light or the coin stuff.
I ALSO need the small harness that plugs into the right side of the power supply (pic 4) that hooks up to the jackpot key lock, coil for the handle & the optic for the cabinet. I can make one if needed but without the door plate im screwed. I have already done a few of these but this is my LAST ONE & I ran out of metal plates!! Last pic shows a close up of the harness I need, its 3 pins wide & 5 pins deep.....

thanks in advance,

Greg