BB1 stepper ram clear

[Chuck spurlock]

Hi all,
I'm having a problem clearing the ram, not real experienced with all this just for a start, anyway a friend that does mostly WMS games loaned me a ram clear for my stepper, actually i bought the cabinet from him. so it gets about 90 seconds in and then stops and won't go any further no matter how long you let it run it stops and on the screen it says can't load root. I'm trying to clear so i can enable the printer to put in a TITO and while i'm doing that i want to enable the arm, any idea why it stops and won't mount the root>

[rickhunter]

From the errors, looks like there's a read error on the clear card, have you tried another clear card.  Also check the CF slot pins inside your MPU, sometimes while inserting cards, the pins bend causing errors such as yours.

[Chuck spurlock]

yeah my buddy said he had a extra card and loaned it to me, i told him about it and he says the same thing as you, probably bad card, i'm just going to have to buy 1,i have a handful of clear cards but no wms. I appreciate your time and help my brother, thanks

[Chuck spurlock]

fixed

[ok2bnvus2]

can you tell me what clear card you used im having same problem ty