Wizard Of Oz E1.11 Game in a BB2 With BB1 CPU, Trigger Error

[Ash100]

I have a backwards converted BB2 with a BB1 CPU and TSE Box to play the BB1 and BB1.5 Games which works great on everything I've put in it so far, but I'm having a problem with a Wizard of Oz Game right now.

The game CF is S933-000-1000 which is Family E1.11. I have the Top Box Fooler Card and OS, all of which are OEM Cards.

I've played this game before in a BB2 with the CPUNXT-2 without any problems. But, when I load it into the BB1 CPU and set up the game, I get an Error before it finishes the Configuration In Progress.

The Error is something about Missing Trigger at 11 or 12. From what I've seen in the troubleshooting tree, it says to replace the BIOS Chip.

So, my question is this...will a BB2 3000 BIOS work in a BB1 CPU? Or, what do I need to do to get this game to play?

Thanks,

Curtis ash100

[brianc101]

I have it listed as CPUNXT-2 even though it's E1.11.

Curious on your NXT1 conversion.  Have you run into any other problems running BB1 Games on it.  I want to do this in the future.  Already have the box for BB1.5 games. So many of the great classic games were on BB1

Brian

[coolwavepic]

I think this game was only meant for NXT2 in a BB1 Cabinet. The game is too intense for the CPU on the NXT1. The proper upgrade is to put a NXT2 in a BB1 or BB1.5.