Pachislo slots - Looney Tunes

[Humor12]

I have a Looney Tunes Back in Action, Pachislo Skill Stop Slot machine that has an E-7 error msg.
How do I fix this ?
I can add a picture when I get home, thank you

[erbs]

You may have better luck getting an answer at Pachitalk.com  That website is dedicated to the Pachislo machines. Good luck.

[Mr. Dinoman]

Error Codes

E-0/ (CE/CJ) = The token slot is jammed.
-Remedy: Push the button at the token slot.
E-1/ (HE/ HJ) = The hopper is jammed.
-Remedy: Turn off the machine, remove the hopper and take out all the tokens.
E-2/ (HE/ HJ) = Hopper malfunction.
-Remedy: Check the hopper.
E-3/ (HE/ HJ) = The hopper is empty.
-Remedy: Refill the hopper.
E-4/ (RR) = RAM error.
-Remedy: Push the reset button.
E-5 = Reel error.
-Remedy: Restart the machine and push the reset button.
E-6/ (CO) = Prize error.
-Remedy: Push the reset button.
E-7 = Hopper Overload.
-Remedy: Check the hopper.
E-8 = Hopper disconnected.
-Remedy: Check the hopper cable/connector.
CE/CJ/C2 = The token slot is jammed.
-Remedy: Clean token mech with alcohol and reset machine,
OF = You have hit a Big Bonus and the machine needs to be reset.
-Remedy: Push the reset button and/or do the reset procedure.
HO = Hopper out, same as HE. The hopper is disconnected.
-Remedy: Make sure all cables are connected and you hopper is connected.

[Mr. Dinoman]

This is something else I have that might help you:

If you own a Pachislo Slot Machine you WILL have to reset your machine eventually.  Error codes will prevent you from playing your machine and without resetting it will be stuck with an error code... forever!

Resetting your Pachislo is easy when you know the steps.  The most common reasons why a machine needs to be reset include:

1. The machine was moved which set off an error code.
2. A coin is stuck in the coin mechanism or hopper, which set off an error code.
3. A bonus was won but not enough tokens were in the hopper to pay out, which set off an error code.

To reset your machine, whether you have a reset key or a reset switch, follow these steps:
 
RESETTING A PACHISLO
1.  Leave the machine plugged in.  On the inside of the machine on the power supply (usually located bottom left of the machine next to the hopper) locate the "Off" toggle switch or rocker switch.  Turn the machine off.

2.  Locate your reset key or reset switch.  Usually on the same power supply, sometimes, as in the case of Babel, on the upper right.  Turn the reset key to the right, or hit the switch to the position it is not currently.

3.  Wait a few seconds and turn the power toggle switch on.

4.  At this point you should see a number on the front door readout between 1 and 6.  This indicated the odds your machine is currently set at.  Tap the black spin reel knob a few times.  Some machines only once, some three times, some you will need to hold it down for a few seconds.

5. Turn the reset key or switch back to its original position.  Now you will see a 0 in the display on the door.  If not, repeat the procedure slowly.

6.  Some machines require you to turn the reset switch back off and then on again once more to completely reset the machine.

That should do it!  Now you are ready to play!

[Humor12]

I did try the Pachitalk.com, but nothing but spinning wheels. never gets anywhere

I have taken the coin tray out, and disconnected the wires, and put back together empty and filled it up, with no results. Still E-7.

I have turned off the power in the lower left, and then turned off the switch on the right in the top section, over 100 times over the past few months, and nothing is different. All of the lights and screens appear to be lit up and the sound works. When I put in a coin, it just drops to the tray below. Does not go into circulation inside of the machine.
I hate to throw this thing out, as it looks cool for the grandkids. But, I have tried everything noted in these posts.

Any ideas ?
Numbers to call for assistance ?
Thank you