BB2 stuck while trying to clear. OS?

[johnnybgood1]

Hello everyone. 

I recently went to load a game into my BB2.  The game is epic monopoly. I have loaded this game before with no issue. This time I got I blinking white light on the top left button.  It's an OLED deck.  I might have confused my OS cards between clear but I have tried all that I have and I get the same result.  See pics.  So now I am kinda stuck.  Anyone know what this could be?

Any help would be appreciated. 

Thanks

John

[Yoeddy1]

So are you not able to complete the clear process?  If the clear process does complete, can you load a different game?

Jason

[johnnybgood1]

Hi Jason,

It completes the clear but when I load the game the pictures shown is what I end up with and it just hangs.  Going to try a different game now.


John.

[johnnybgood1]

Loading another game gets the same results.

[bpracer]

Loading another game gets the same results.

Try unplugging and re-seating the connectors for the hard drive.

[rickhunter]

It's not the hard drive.  The system is not validating the OS card for some reason.  Do you have the os card on the right side slot?  If the Game card is in the OS slot, it will throw out that error.  Based on the screen shot, the card that is in the OS slot is not correct.  An OS will have multiple partitions, it should say something like 4 volumes, yours says only 1, which leads me to believe your game card is inserted where the OS card should be.  The white dot on the OLED panel is normal, as it doesn't go away until the OS boots and probes the USB bus.

[johnnybgood1]

What an idiot I am.  That's exactly what it is.  It was late and I was tired. 



THABK YOU VERY MUCH!