Found NSW MK5 meters board

[bl262000]

After a NSW Aristocrat MK5 meters board that accepts the 26 way ribbon cable.

ThanksBL2620000

[dave2228]

What machine u got so ur after hard meters ?

[bl262000]

Its an Aus MK5 Xtreme, Intl Backpane type 2 PCBA 2501-410782 with 26pin ribbon connector for meters board.
The meters board looks like this one:
https://www.sydneyslotmachines.com/home/wp-content/uploads/2012/06/Aristocrat-MKV-MVP-Meter-Board.jpg
I have a part number from the manual of 410366

Heres some info based on one of the parts catalogues:
KIT-HARD METER ASSEMBLY 1 572072_1
LABEL – METERS Mk6 EUROPEAN 1 574325
LABEL – METERS Mk6 RUSSIAN 1 578259
ASSEMBLY – HMB/SPIB (Not Illustrated) 1 568890
PCBA – HARD METER BOARD HMB (Not Illustrated) 1 410510

Thanks for your help.

[bl262000]

Hello all,

I am still after one of these, or if someone has a machine with one in it, a nice clear close up of the PCB and details of the markings on one of the components "FL"s ie FL6. I believe all the FLs are the same.

Thanks
BL262000

[Shaneomac]

i got like 10 sets of meters in brisbane. mark 5 and 6 work on both just dont clip into the machine housings if you use the wrong ones so you just lay them inside the machine instead. $100 a set plus postage

[bl262000]

Thanks for your help ShanOmac.