Bally Pro-Slot 6000 Hopper Error Resolution and Parts Needed

[jkowal43]

Hello,

Thanks to K-LAR (I'll happily plug them here), I was able to get my Bally Pro-Slot 6000 up and running. However, when trying to cash out, I get the Hopper 31 error issue. In initial testing, the hopper was able to pay out a handful of coins, but then would repeatedly stall. Resetting it and shaking the hopper sometimes would generate a few more coins to spit out, but now nothing is happening. The motor is fine, as I can manually move in either direction. I cleaned the hopper optics, and ensured all connections are good, along with clearing any debris.

So, I think I need a new hopper optic for a 5cent hopper and/or a new control, or an entirely new hopper (I would happily change the denomination to accommodate a larger coin). Where can I find these items for sale?

Thanks,

~ Justin

[Sunrise Side]

If you feel comfortable with removing the motor and disassembling the motor , the motor  commutator may need the slots cleaned of carbon dust  with a razor blade. If not there is a hopper on Ebay