New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Trying to do a clear RAM because of an 88FF error  (Read 2057 times)

0 Members and 1 Guest are viewing this topic.

Offline Phurman!

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 52
  • Reputation Power: 4
  • Phurman! New User has no influence.
  • Gender: Male
  • NLG
Trying to do a clear RAM because of an 88FF error
« on: June 10, 2025, 08:54:46 am »
I am trying to do a clear RAM because of an 88FF error.
Changed the battery (which is GOOD) with a new one.
Set dipswitch 1 - #8 ON (I have "LEAVE IN CLEARS")
Held test and pseudo while turning on power .......
Everything is blinking and error code 8100 is on ...
HELP would be appreciated .....

Note: Dang thing worked GREAT until left with the 101 year old grandmother (who passed 2 weeks ago 😢) must have taken the workings with her!

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3870
  • Reputation Power: 332
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Trying to do a clear RAM because of an 88FF error
« Reply #1 on: June 10, 2025, 01:38:40 pm »
only DIP switch 1 on to do a clear, 2 thru 8 should be off all of the time
Let them that don't want any, have memories of not getting any.

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3226
  • Reputation Power: 212
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Trying to do a clear RAM because of an 88FF error
« Reply #2 on: June 11, 2025, 04:43:45 am »
I thought 1-7 were left ON all the time? Turn on #8 for clear and the turn #8 off after clear is complete, for the leave in clear chips?

Offline Phurman!

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 52
  • Reputation Power: 4
  • Phurman! New User has no influence.
  • Gender: Male
  • NLG
Re: Trying to do a clear RAM because of an 88FF error
« Reply #3 on: June 11, 2025, 08:10:31 am »
only DIP switch 1 on to do a clear, 2 thru 8 should be off all of the time

Badbaud - I have your "LEAVE IN CLEARS" with instructions. I go thru your procedure (several times...) comes up with all lights blinking and code 8100. What's up ??????
I need help ... can't get rid of the 8100 .. ugghhh, frustrating!😢
« Last Edit: June 11, 2025, 08:59:16 am by Phurman! »

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3226
  • Reputation Power: 212
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Trying to do a clear RAM because of an 88FF error
« Reply #4 on: June 11, 2025, 06:28:07 pm »
Try this DS1 =  1-7 ON always. Use #8 to do the clear process, turn #8 ON , do the clear procedure, after you see CLC, turn OFF #8  and leave off. Follow the rest of the instructions from that point.

Offline Phurman!

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 52
  • Reputation Power: 4
  • Phurman! New User has no influence.
  • Gender: Male
  • NLG
Re: Trying to do a clear RAM because of an 88FF error
« Reply #5 on: June 11, 2025, 07:31:25 pm »
Ok everyone… my problem has been SOLVED…..
Thanks to a phone call to K-LAR and talked to Badbaud (Allan).
He made several suggestions, one of which I did first. And that was to “swap” the RAMs around.
Upon removing the first one, I found the left upper pin was bent in on a 90degree angle
Seems like someone messed with this machine when it was in the grandmothers care.
Straightening the pin and reinserting it - going thru the “clear ram” process solved the 8100 error and low battery issue.
Thanks Badbaud .. you rock👍
Your knowledge is an asset to this web site…..


Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3226
  • Reputation Power: 212
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Trying to do a clear RAM because of an 88FF error
« Reply #6 on: June 12, 2025, 05:09:03 am »
So did you use this procedure? DIP switch 1 on to do a clear, 2 thru 8 should be off all of the time.  I believe SW#8 on DS1 is used to do the clear?

Offline Phurman!

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 52
  • Reputation Power: 4
  • Phurman! New User has no influence.
  • Gender: Male
  • NLG
Re: Trying to do a clear RAM because of an 88FF error
« Reply #7 on: June 12, 2025, 05:33:35 am »
I had used that procedure several (I mean several) time's before.
It did not do any good.
I called K-LAR and talked to Allan who suggested “rotate the RAM chips”
Please read my last post!
I found that one of the RAM chips had a bent pin and was not connected.
Straightened the pin - reinserted the chip - went through “clear ram” procedure and “WAHLAA” it’s back to normal.
Thanks to Badbaud at K-IAR
THE ISSUE FOR 88FF AND 8100 with everything flashing HAS BEEN SOLVED: BENT RAM PIN  :applause:

 

If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal