CEI video poker hold lights 3,4 and 5 do not light

[Yoeddy1]

Just to double-check this,

did you change dipswitch #2, positions 5 and 6 to OFF (open) and try the game? Both of those are normally in the OFF position. The #5 position affects how the lamps operate with some game software. I noticed in the photo of your mpu that they were ON.

Good catch.  I'll bet that will take care of it.

Jason

[tomco]

 Okay we have success, I flipped the dipswitch as requested then re-installed the board, no bueno, so I removed the board again and replaced the CR20.( Picked one up this afternoon during my travels), and all is functional all light flashing as normal.
 I want to thank everyone who offered help and suggestions as I would never have been able to trouble shoot this alone
 A donation will be given to help keep this site up for others who seek help.


Thanks again


Tom

[rokgpsman]

Okay we have success, I flipped the dipswitch as requested then re-installed the board, no bueno, so I removed the board again and replaced the CR20.( Picked one up this afternoon during my travels), and all is functional all light flashing as normal.
 I want to thank everyone who offered help and suggestions as I would never have been able to trouble shoot this alone
 A donation will be given to help keep this site up for others who seek help.

Thanks again
Tom

Thanks for sticking with this and letting us know how it ended, others will benefit from your repair log in this thread.  And a big thanks to Doyle for the important info that zeroed in on CR20.

Good Job!     

[The Fatman]

I love a good success story.
NLG forever ....
Dave F