Need a working CPU board AS-3356-232 Rev A for a Bally PRO 5500 reel slot

[ucanwin]

Looking for a reasonably priced  working CPU board AS-3356-232 Rev A for a Bally PRO 5500 reel slot.
This is the board in the tray just under the reel mechanism. Any help would be appreciated. Thanks.

[mr-monoxide]

I have one, it my not be the part# you referenced but it is a working and tested 5500 mpu. Do you need the mains installed in it as well?

[ucanwin]

Hi mr-monoxide,
Thanks for your reply.
Well, my story is.. I had a good working spare board for a Bally Pro 5500 and a friend needed one for a repair for his customer. So, I gave mine up. I would like to have another spare on hand just in case I need one for myself. I should get a non-working board back from my friend tomorrow and I assume the mains are in it and hopefully still good. So, if you can tell me what you need to get for your board with and without the mains and shipping to Franklin, WI 53132 I would appreciate it. I will get back to you tomorrow.
Best regards,
Jerry

[mr-monoxide]

ucanwin, I'm trying to send you a PM but your inbox is full....

[ucanwin]

Hi mr-monoxide,
I cleared some messages so hopefully you can contact me. Here is my e-mail if that doesn't work.
ucanwin777@aol.com