Author Topic: Bally 1114-17 Hopper wiring problems (Read 8823 times)

JustTech · « **on:** May 07, 2016, 11:01:04 am »

Had animal put corn into this machine and pulled wires off the hopper payout relay, now need some help trying to find where they went. wires are yellow with red tracer and white with brown tracer, was trying to trace out where they went couldn't yet so maybe some one has the info for me.

JustTech

rdaniel · « **Reply #1 on:** May 07, 2016, 11:03:22 am »

How did an animal put corn in the machine? Was it stored in a barn?

rdaniel

JustTech · « **Reply #2 on:** May 07, 2016, 11:08:42 am »

Garage

JustTech

jimliner · « **Reply #3 on:** May 07, 2016, 01:22:00 pm »

How did animal get in?

The Fatman · « **Reply #4 on:** May 07, 2016, 06:11:36 pm »

He must have had a fake ID ...

Send pics and info on the model # and if I have one, I will take pics and write down the switch assembly on the relay with the wire codes for you.
Dave F

rokgpsman · « **Reply #5 on:** May 07, 2016, 08:49:54 pm »

Quote from: The Fatman on May 07, 2016, 06:11:36 pm

He must have had a fake ID ...

It can happen.......

The Fatman · « **Reply #6 on:** May 08, 2016, 02:13:13 pm »

I think I know that guy ..... fuzzy little nose .... smells like a big mouse.... got to be him

JustTech · « **Reply #7 on:** May 08, 2016, 05:21:03 pm »

Here is the picture of the offending hopper, you can see the wires off of it and btw the one I said was white with brown tracer is really white with yellow.

Thanks for your help.

JustTech

shortrackskater · « **Reply #8 on:** May 09, 2016, 10:41:39 am »

Can you post a high resolution picture of the front of the hopper, looking at the wire bundle in front?

nauseous · « **Reply #9 on:** May 09, 2016, 02:42:44 pm »

The machine I am working on has yellow/red going to the Payout Relay, it runs from the payout step-up counter switch.

JustTech · « **Reply #10 on:** May 10, 2016, 07:36:47 am »

Describing the wire connections on opposite end of yellow/red it goes to the beau plug top center, the white/yellow goes to the plug right under the top locating pin. I have a open terminal on the left side of relay on bottom. I'm wondering if both go to the same spot on the relay? here is the picture of the relay pulled off and left side.

DavidLee · « **Reply #11 on:** May 10, 2016, 06:05:19 pm »

Here are a couple of photos that might help. The yellow red wire is 3rd from top on inside.
The white yellow is at the bottom outside. Also included the white blue wire inside bottom that you need info on last week.

Jon · « **Reply #12 on:** May 10, 2016, 06:16:50 pm »

a 11:14 is a 3 coin multiplier almost identical to a 1090 if you go to my Facebook page you can download the 1090 wiring diagram if you have not already downloaded the Bally's manual I will put a copy on my Facebook page very important you use both it is almost The Identical machine the 1114 is a lowboy the 1090 is a Highboy

I am out of my house I am back on the internet and very happy

in Bullhead City Arizona for a week of a well-deserved vacation fixing everything my mother-in-law needs fixed and the sister in law on her birthday oh my god there goes the vacation

DavidLee · « **Reply #13 on:** May 10, 2016, 07:50:56 pm »

Jon, that's what vacations are for, getting all those things done you couldn't get to.

Picked up a 742-A machine Saturday 777 and bars. Got it running after two days of cleaning.
Everything works fine which was a surprise. The only thing missing is the magnetic in the coin mechanism.
The top glass is good, but reel glass could be replaced
Will post photo later.

rokgpsman · « **Reply #14 on:** May 10, 2016, 07:53:33 pm »

Sometimes people take the magnet out so they can use gaming tokens.

DavidLee · « **Reply #15 on:** May 10, 2016, 08:08:49 pm »

Thanks for the tip on tokens. Hopefully I have magnet that will fit and work properly.

Jon · « **Reply #16 on:** May 10, 2016, 08:09:38 pm »

Dave I have hundreds of course rejectors in storage I figure I will finally get to Michigan in probably 2 weeks it may take awhile to get to all the boxes don't pay the price people want for a queen rejected people on eBay are retarded they are way overpriced and Ludacris wait till I unbox

DavidLee · « **Reply #17 on:** May 10, 2016, 08:20:25 pm »

Jon, thanks no big hurry. I know you been real busy and it's going to take awhile to get reorganize.
I might have a magnet, will look tomorrow and post photos of machine. Picked it up foe $100 and it came with the drop box stand. Been sitting a long time and the exterior chrome has some pits, but might clean up.

Jon · « **Reply #18 on:** May 10, 2016, 09:38:49 pm »

Dave I would give that for an empty cabinet as long as the cabinet was

JustTech · « **Reply #19 on:** May 11, 2016, 08:19:06 am »

Thanks for the replies. David my relay has a slightly different wiring than the one yours here is my picture on inside part. Jon I went to your facebook page but it's the first time I been on facebook since I didn't have an account. I didn't see the download link. Thanks for the information.

News:

NLG Site Navigation Menu

Author Topic: Bally 1114-17 Hopper wiring problems (Read 8823 times)