S+ slant top flourescent lights but no display

[bremax]

Hello i have a igt s-plus, the existing battery was pretty much dead, i have since replaced the battery, should a do a ram clear prior to booting it with the new battery, is there any damage i can do if i start the slot with the new battery could it wreck the eproms?
Just want to make sure so i dont mess anything up

[Shaggy]

Hi Bremax, no if you've changed the battery and made sure the polarity is correct, you should be ready to fire it up. Chances are it will go to the 61 error. Open the door or keep it open, press the test switch for a few seconds. It might make a ding but doesn't always, but the display should change to 61-1. Then close the door and latch it and turn the reset key one time. Displays should clear and after a few seconds it should initialize spin the reels and the insert coin light come on and be ready to play.  If it goes back to 61, start a new thread and we'll deal with your problem by itself.

Dave

[bremax]

Once again, this site comes through, you guys are amazing, I followed all the stepes Shaggy suggested, and it works like new again, so much appreciated
Steve

[Shaggy]

Steve, kudos to you for taking the cautious approach. You did the right thing. Don't turn keys or anything. If you're not sure, ask. Somebody is always around. Glad you got it going and enjoy your machine. In the future start a post of your own, we're always here.

Dave