Hot Peppers Vision

[therockinelvis]

Unless someone else knows better, Vision sound comes from the pcmcia card and the monitor. The multi-media should not do anything on vision.

[ianmcneil68]

When I put the vision monitor in my round top I used a chip and software for Pinball and I did get multimedia sound. However, no SS chip was used in that machine. I think it would work if not for the SS/SB combo in my Hot Peppers.

[tollguy316]

ss CHIPS ( S+ PLATFORM have standard sound..... SB chips (S2000 PLATFORM) have enhanced sound... simple as that. ...... If you put an S+ kit into an S2000 machine; you'll only get basic sounds.... If the S+ kit has an S2000 sb chip equivelant; you'll then get enhanced sound........ not to be confused with a milti media light board for enhanced sound...

[ianmcneil68]

Makes perfect sense and matches exactly what happened in my case.

[ianmcneil68]

Ok. Now I'm thinking about it and I think terminology might be getting confused because I am fairly new to this. Here is what I did; I took a Crystal 7's S2000 with a light board and DSV00038. I installed a vision screen and chips/data card for pinball. While playing the game I got the same Crystal 7's sound as I always had. So, I realize I may not get multi media light sound on my SB/SS combo (Hot Peppers). However, multi media sound can run on a vision game, in my case it is pinball. During the bonus round all vision sounds play as they should. During spins, DSV00038 sounds.

[ianmcneil68]

I'm getting close to calling this one done. Maybe a TITO and possibly player tracking. Not sure yet. This was my first S2000 and it's been fun learning and building it up. Thanks to all those that helped out. 


https://www.youtube.com/watch?v=R-VTGgyHFKg

[ianmcneil68]

My latest oddity with this machine. This has been a very long thread so as a reminder; I got everything working with this chip combo SB000001 SS4706 SG000093 VS009GX0. The SS4706 is somewhere around 90% payout so I figured that I would throw in an SS4703 to get a higher payout. Only it will absolutely not work. Basically, I get to "hold button for 2-3 seconds", close the door, "testing memory", "NETPLEX LINK IS DOWN" and everything resets. It does this in a loop. Same thing over and over. I tried 2 different SS chips with same results. I pop my original SS4706 in and the whole setup process is normal.  

Jim, I figured something out today. The chip does matter. The SS4703 that I ordered was on a M27C64A chip. My original SS4706 was on a 27C64 chip. Today I got the SS4703 on a 27C64 (like the original) and it works just fine. SO....it seems the chip does matter. Just thought I'd add this in case someone has this issue in the future.