Bally E series won't accept coins

[ALIDMAN]

Hi everyone , I got this machine from friend of mine who did not wanted any more and we all know that its because it does not work , in beginning I thought it was because of solenoid that would release pull handle but I was wrong , I notice when I push down on the coin drop spring to see if I get credits , I can hear click which will show register coin on  DIRECT TO CASH BOX meter but , that's all it does and I do not get any credit so I can pull the handle , also the solenoid does not release the handle , one other thing I notice is normally when any older  machine gets turn on the plate under the coin comparator gets erected and solenoid activates it , in this machine that does not happen , any help will be thankful   

[Paul]

Well all I can tell you is its NOT a E series slot!
Its a 815  referred to a EM- short for "Electrical Mechanical".
No circuit boards all solenoids and relays.

[ALIDMAN]

thank you

[Amechanic]

Do you have the hopper for that machine, its not pictured?  Your going to need a EM manual. There are a series of contacts and relays that have to be cleaned and possiblie adjusted for it to work or take coins.

[ALIDMAN]

I have hopper but not sure what's wrong with it

[drfreeze1739]

the hopper has to be pluged in to make a connection to make it work.

i have the manual.

pm me you email address and i can send it to you.

all so check the 2 big molex plugs that go in to the door on the side. that come from the inside of the slot to the door.

they have a big oeange and yellow wire.

that where a lot of issuses are...

make sure they are not burnt and plug in tight..

[ALIDMAN]

thanks guys I will give it shot