Need help installing a new games on Igame.Thank you

[ericigo]

I have a 3902 board for I-game and I have new set of eprom chips whit a poker games can you PLEASE HELP ME "
Where those chips have to go on a board. Thank you very much.
List of chips:
Base:  M0000811
CG1:  C0000770
CG2:  C0000770
PXL1:  C0000770
PXL2:  C0000770
GME1: G0002820
GME2: G0002820
SND1:  SWC00046
SND2:  SWC00046

[rickhunter]

All the sockets should be labeled on your mpu board.  The 2 snd chips go into the multimedia board that plugs on top.  If the multimedia board you have has a simm slot on it, you will need to get the one that uses eproms.  Under the multimedia board, there's a space for either a simm or a pair of chips, this is where the CGx chips go.  Then there's a bank of 4 sockets, the pxl and the gme chips go there, again the order should be labeled on the board.  Then the base chip is the only 40 pin eprom on the board.

[ericigo]

Thank you, I will try and let you know.

[Ken]

I have attached a picture of the same chips on a 3902 board .. like rick mentions the sockets are labeled. SND 1 goes in ROM 1 socket and SND 2 goes in ROM 2 on the multimedia board. The directional markers on the multimedia board eprom sockets are in the opposite than the ones on the 3902 board so just make sure the eprom direction is correct.  Once you install the new game you might have to run the key 22 and set up the new games.

[ericigo]

Thank you very much guys you are awesome !