Bally Gamemaker Error

[tvmaster1]

i have a bally gamemaker that i do a safe ram clear and get this message


and it fist said  safe ram clear  complete or something to that effect and also said to power down and remove clear chip and reset switches


so i did and got this   error



graphics changed . use old graphics to view meters or clear saferam to use new graphics.


and now when i do the clear again it now says safe ran enabled , son then i key the reset switch  and still get the same error




i am using the  the safe ram clear chip P10 and instructions tuning on dip switch  1  and setting  switches 6,7,8 to


any one can help !


thank you

[dextrose42]

Is the battery any good on the main board?

[tvmaster1]

i have replaced the battery but no go
i have heard that a debug chip would be better then the clear chip


but i cannot find a debug chip


any one have one?

[brooker]

you did other change

[shortrackskater]

Just for the heck of it, try a ram clear but without turning on dip switch 6. Use just 7 and 8.

[chuck300x11]

Shorttrack is correct. Redo the clear only changing switches 7 and 8.