Odyssey Hard Drive Repair

[mrzee2000]

If someone has a Seagate Barracuda 4 hard drive that has lost it's life, not all life is lost, if the PC board is not damaged and the drive has stopped spinning, error code 411 or noisy. 99.9% of the time the lower unit drive has been damaged and is not repairable. I install a NEW drive unit on your old PC board, again there is LIFE!  a NEWLY born drive.  Along with this repair I also give you a choice of software either a 15 game or 7 game install. The cost for this service to NLG members $175 including shipping cost in the U.S. I also am looking for Odyssey parts. Please PM if interested. Mike

[Sunrise Side]

I had a dead Odyssey. Hard drive failure. Mike fixed my HD and I had other issues along the way and Mike helped get life back into my Odyssey. Outstanding person and helped me extensively till it was up and running. Mike's HD repair is top notch and makes it very affordable to have a spare if you have a couple old HD running yet in your collection.    Thanks a Million!!!

[Dvbit2017]

Hi Do you still provide the hard drive service? I think my hard drive is dead.

[mrzee2000]

Yes, I still provide services.
PM me with a contact # so I can ask you a few question about the drive.
Thanks Mike

[cmc206]

Hi everybody. Well I bought an Odyssey machine today and got it home to start taking a look. When I power it up it shows 2000 on the coin door. The computer beeps and then it goes to 102. I know thats the battery message and totally expected that. I use the reset key and then it goes to a 411. Then thats it. I see that code might indicate a bad drive. So a couple of questions. Is MRZee2000 still selling drives and if so how do I caontact? I cant send any DM's here yet cuz I just signed up. Next question is should I see the bezel buttons light up? There is no Video either so not sure if that stuff might turn on after the disk is replaced or if I'm gonna be looking at monitor issues. Thanks in advance for any advice. I would love to get this old girl back to her original glory! Thanks Chris in Seattle!

[erbs]

Hang in there. Mike is still active on here. I'm sure he will answer as soon as he reads the post.

[cmc206]

Thanks! Hopefully I can get this thing up off the floor on its stand. It was to heavy for me and the guy that helped me get it into my house. These things are built like a tank! I'm going to pull out the hopper so I can gain acess to the PC. It has a door so I couldnt see it yet. Then I can see what type motherboard it has.

[T]

Thanks! Hopefully I can get this thing up off the floor on its stand. It was to heavy for me and the guy that helped me get it into my house. These things are built like a tank! I'm going to pull out the hopper so I can gain acess to the PC. It has a door so I couldnt see it yet. Then I can see what type motherboard it has.

Harbor Freight has a pretty inexpensive lift. I lower the lift as low as it will go, use my hand truck to set machine on lift. Up it goes
then slide machine on stand. It's the only way to go besides 3 or 4 guys. Good idea to have a another person with you to keep machine
stable from hand truck to lift