Un-Known wires - plz assist

[Caliwebman]

Hi all, can anyone please advise to me what the two wires colored solid light green, and one colored blue with purple tracer, that both come into play from within the area of the BV. I posted a picture of them in my white ice s2000 enhanced and am fighting a door open M error tat will not for the life of me go away. Have tried everything including even bypassing the main optics by wy of the cherry switch, traded known to be working I/O's... clear chipped with 224.... followed by a 45.....done everything and got nuttin.

So for all of you Gurus here please advise what these wires are for, and if they could be presenting me with the M door challenge, and if or what it is I should do with these wires.

Thanks to all!

Scott

[cowboygames]

If they're tied together they may have been for your BV door switch

[erbs]

Those 2 wires are definitely for the BV door. Make sure they are tied together to bypass the BV door. Looks like someone scotched taped them together in your pic. Also the belly door switch is on the same circuit make sure it is connected or the 2 wires going to it is also tied together. Check those out 1st.

[Caliwebman]

Thank you errbs! Tell me tho, im a noob, when you say, "tie together" do you mean connect them by wire making for a loop between them - i.e. just twist together purple with green? Or having them tied together but not connected by wire?

[qbert]

Connected so current can go through them.