Bally 809 payout problem

[mystic122468]

Hi guys! After messing with my Bally 809 for a few weeks it's finally up and working (thanks to the help here).
The last problem i'm trying to figure out is some of the payouts are not working..
The jackpot and a few others are working as they should, However the Single and Double cheeries are Not doing anything.


I've traced the wiring from the Pull Handle, all the way to the Hoppers payout disk and all seems good, then it goes to the top half of the machine and i'm getting lost there. I don't really know the sequence of what order things happen in..
Any thoughts on where I can look next?


thanks again!
Jim


 

[RiseLikeRa]

Mystic:


There could be a lot of causes for this issue.   Check your finger alignment on the first and second set of reel wiper fingers.  Clean the copper  buttons and check that proper contact is made.  Keep us posted.


Ra

[Amechanic]

I would start by checking the condition of your wiper fingers on reels 1 & 2 to make sure they are making a good contact to the wiper boards.. Clean them with a scotch bright pads. It woulda hurt to do all 3.