Need IGT S+ MPU Tray

[marcdavis]

Hi Everyone - new to the board - this place is awesome. I am just getting into refurbishing a couple of IGT S+ machines. One is completely missing the MPU board and tray; Getting a board is easy... finding one with the tray and the transformer seems to be nearly impossible.


So - anyone have an IGT S+ MPU board tray or know where I could acquire one? Thanks very much!


Marc

[Amechanic]

Try contacting a few venders on the home page. Midwest and Ohio slot should have that tray an transformer.

[hotlsot]

There are 2 types of trays with different depths. Make sure you get the right one.

[marcdavis]

There are 2 types of trays with different depths. Make sure you get the right one.

You don't happen to know the determining factor or the sizes? I was under the impression that the S+ with the MPU behind the hopper was only one size of tray.

[hotlsot]

if the mpu is behind the hopper you most likely need the shallower tray about 1.5" deep. I have only 1 of the shallow trays. $20 plus shipping.

[marcdavis]

if the mpu is behind the hopper you most likely need the shallower tray about 1.5" deep. I have only 1 of the shallow trays. $20 plus shipping.

My other 1.5" tray (at its widest point) fits in both machines so I'd say that's the one. Are you offering the tray+transformer+board or just the tray+transformer; and how do you want to do the transaction? Paypal?


Marc

[hotlsot]

Sending pm

[markb7605]

i have both

[marcdavis]

Found a board and tray - thanks everyone for the input!


Marc