Bally Iview 3.0 Video Player Touchscreen unit assembly.

[FireballJackpot]

This is a previously working Hitachi Iview 3.0 unit. Bally power supply AND SD Cards INCLUDED!!. See photos for the unit showing POwer and Loading LEDs lit (The Red Light is solid because it's not loading anything due to the card reader port broken off it. That Red LED will normally flash as the info is read from the SD card).


This is an Iview3 unit that plays a stand-by video via an on-board SD Card. Not to be confused with the 2.0 systems that have a big ribbon cable that connects "the screen" with the big controller box. THIS Iview 3.0 is all self-contained. it comes with TWO SD cards that should have the stand-by videos on them for a Hitachi head unit.


The unit worked until an operator broke the SD card port from the circuit board by pushing on it too hard to insert it. I do not have the means to properly repair it. I've included some parts boards that have good SD card ports. If you have a solder station and the skills to replace surface mount components, this is the deal for you!  These units run about $200-$250 each - IF you can find them!!  A lot of casinos use these in their current inventories, which is why there aren't a lot available to the 2nd hand market.

GONE!!  Gotta jump on these

[wel728]

For anybody who missed this check out ebay selling a IView on there.  Under parts for slots machine.

[FireballJackpot]

There are 4, 2.0 DISPLAY ONLY units on there right now (you can tell a 2.0 because there is a ribbon port on the back of it - those require a REMOTE controller). $100 each (no controllers). Several other controllers (additional auctions). And don’t forget the remote power supply, the ribbon and video file.


Thats why 3.0’s are nice - All in ONE unit.

[wel728]

Yes, you are right , but it is a complete set working ( Controller ,Ribbon Cable ,Screen ,And power supply.