Rookie Needing HELP! Double Diamond Haywire

[sargetoad]

Hello! Thank you very much for reading my post any help/feedback is greatly appreciated. I recently purchased my first IGT Double Diamond Haywire I own several pachislo machines but none like this one. I'm trying to learn the ways of this machine but I am not to a great start. When I plug the machine in multiple things light up the bill validator does its thing and so does the ticket machine. However the door does not light up and neither does the LCD screens. Do I have something unplugged or am I missing some parts (if so what and where could I purchase the part). Again thank you very much. I have attached some photos so you can see what I have.

[RB]

Welcome to NLG.

For starters there's no processor board in it. Not going to work without one. There are different models depending on what mother board is in the machine. Most likely it's a 960 MB needing a 500 series MPU.

[sargetoad]

Hello RB,


First thank you again for responding to my post! I now see that I have no processor board in it like you said. Do you mind telling me where/how I could look to see what mother board I have? Also are you able to recommend where I should buy a processor?


Thank you,
Austin

[sargetoad]

I looked at mother board and it does say 960. There are two connectors a big one and a smaller one. Is this a 504 board?

[RB]

504B board recommended but a 502 will work. Advantages with 504B are pretty much in the sound. If I had a DD Haywire, I would want to run enhanced sound. 502 will have some interference issues with enhanced sound. You are going to need a complete set of chips for the MPU as well. I can help with that but unfortunately don't have any spare boards.

[sargetoad]

Thank you RB. So if I get a board may I contact you about the chips?


-Jon

[RB]

Absolutely. Thanks!