WTB WBA 11 Transport IDO23 IGT S+

[AcePeter]

Hello looking for the older transport WBA 11. Anyone have one at a reasonable price? I have a few in my garage but can't find them. Thanks


Thanks to JIM from MidWest Slots

[Jim]

Hey, you might consider upgrading to a WBA 12/13,  you will get the latest software (S+ will take new 5 and 10 etc. no new 100) and you will get 4 way acceptance, the only thing you would have to change would be the connector on the shelf assembly.  ( not sure what software is available for the WBA11)

and as always, I have all the parts you need!.

Jim

[AcePeter]

Thanks, Yes I have the harness for the wba 12/13, just reluctant to put it in.

[Jim]

Piece of cake to do this,  take out the transport, take out the cash can, remove the following screws, the one holding the reel shelf to the cabinet, the one holding the bv metal housing to the reel shelf, now the tricky one,  loosen the first nut holding the reel shelf to the cabinet side wall, (small extension works well)  this allows the reel shelf to be lifted up about a inch to allow you to pivot the bv shelf assembly toward you  when you remove it. now remove the three screws holding the bv shelf assembly (two on the back wall and one on the outside of the metal housing beneath the power supply, ( sometimes there are two screws on that side one in the back)  now remove the shelf assembly and swap the connectors,pay attention to the way you put the connector on, you don't want to put it on upside down, I believe the red and black wires are on the bottom. worse case call me and I'll help you through it.

Jim

[AcePeter]

Thanks Jim. On my way home now to tackle it. Sure appreciate your help.