How do I know if I have TITO already installed on an S2000?

[Simple Sam]

I have an S2000 that I have been using as coin/bill in/coin out which I'd like to convert to TITO.  It has a WBA 13 SS bill validator that accepts recent $5 bills in any orientation.  It also have an Ithaca Epic 950 printer (I've never enabled it so I don't know if it works).  The cabinet labeling indicates that it had a TITO when in casino use (insert bill or ticket).


What should I be looking for to verify whether there is a TITO board installed?  Where is it located and what does it look like?


Thanks!

[rickhunter]

It is never installed from the casinos.  The casinos use a central server for TITO validation.  For home use, we buy a product that enables ticket validation.  Unless you told your dealer to install it, you probably don't have it.  But if you want to look, in the back of the slot there's a grey box with some connectors on it, the top right one is a 5 pin single row molex connector.  This is the connector where the TITO home devices connect to.  The photo below shows one of my machines.  There are various versions of the TITO device for home use.  This is just one example, but they all connect to this part as shown.

[Simple Sam]

It is never installed from the casinos.  The casinos use a central server for TITO validation.  For home use, we buy a product that enables ticket validation.  Unless you told your dealer to install it, you probably don't have it.  But if you want to look, in the back of the slot there's a grey box with some connectors on it, the top right one is a 5 pin single row molex connector.  This is the connector where the TITO home devices connect to.  The photo below shows one of my machines.  There are various versions of the TITO device for home use.  This is just one example, but they all connect to this part as shown.

Perfect.  Thanks!