New member, multiple problems

[gtownsend]

Hello, I am new here and this is my first post. I have 3 slot machines, Game King Multiple games, Triple Diamond and Super Cherry. I recently moved from Pa to Florida. Had a moving company move the machines and now none of them work properly. My first question is, should I start 3 different threads?


I have checked all of the machines for loose parts, chips, etc. Found some loose stuff and fixed it; however it has not solved the problems.


Since each machine has different problems, I am assuming that I would need to post a new thread for each problem.


Also, I am rather dumb about all of this and would need some guidance as to how to best present my problems to the forum.


I appreciate any help I can get.


Thank you

[jay]

No such thing as a dumb question....


Please start a thread for each machine in the appropriate subforum.
Describe what is happening or not happening and/or what you think it should do.


You can post pictures if that helps. If you take them from your cell phone camera they may be too big but if you email them to your self it will give you the option to send them as a smaller size.
Post the smaller pictures.


Hope this helps.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

[rickhunter]

Typically when the machines are moved like that or shipped, most sellers that care about you will tell you to make sure everything is plugged in well before you power them up as things tend to get loose during their journey.  A lot of the times, it's just a loose mpu board.  Removing and re-inserting usually fixes most of the problems.

[laraider]

Im new too, had the same problem when i first got my machines. Hope you can get a quick fix!