Bally's s6000 free play

[slotcamp]

I have a bally 6000 with a small board attached to the coin Mech and the service button. Normally when you hit the service button credits show up in the far left credit window,  so you can play the game. The game had a 88 code on it so I replaced the battery then Ram cleared it with the coin mech switch in the up position. set up the date and time then tried to set up the options as best as possible. I currently have no errors but the service button will not add credits any more. is there an option that has to be set in a certain way to make this little board with a 8 pin chip on it work again?

[Badbaud]

Welcome to NLG.

[slotcamp]

i would also like to add that the machine has no hopper, no printer and no bill validator just a little board that substitutes the coin mech for free play.

[Sunrise Side]

I may have some info. I will look tomorrow.

[Sunrise Side]

I have a book from the place that was doing this mod and there was no special instructions for settings in 11d menu. what 11d settings have you changed after the clear ?


Try this, do a clear and leave all settings at default. Try it at default settings.

[slotcamp]

Thank you so much!!! I re-ram cleared, set the date and time and Eureka!!!!!! it worked!!  Thank You!

[Badbaud]

See, I told you this was a great forum.
Alan at KLAR