I have a "friend" who just might have used a couple 2 x 4s and some old encyclopedia Britannica's.
Put the machine on 2 2x4 and lift one to insert a book under each of the 2x4s near the front of the machine.
Using the 2x4 as a lever lift up the back side and insert a book under the rear. Now that your off the ground you can use the 2x4 as a lever to further raise each side adding one book at a time until your levelish with the slot stand and then slide the machine safely over.
Hydraulics are so over rated....
** available at Good Will or Sally Ann for $1 each if you don't have a set laying around.