IGT Vision "Kool Kat" AUXIO error

[Stayouttadabunker]

The RAM error is easy - just open the door, flip the reset key and close the door to erase it.

After that though, on the VFD display, it just simply displays "Protocol Mismatch".

Don't worry about my photo.

The camera went off as it was changing info.

When you go and view in the LCD options and look under the "Errors" tab, you get this additional info of "AUXIO PROTOCOL MISMATCH".

I forgot....what's wrong when you see this pop up?


Click on photo below to enlarge if needed...>>>

[Stayouttadabunker]

I think the BGM59 "Kool Kat" is corrupted?
It's missing the "sig" file that checks for the "signature" of card or checksum.
If any has an OEM BGM59 Kool Kat card, please PM me?


***UPDATE***
It's working now.
I ended up wiping everything off and reinstalling.

This is the working combo that works for the Vision "Kool Kat" 3R1L3CM ...>>>
SB000200 with a checksum of 6C9A
SG000248 with a checksum of F3E4
Version VS009GX0 with a checksum of 34C9

The BGM00095 card MUST have:
RFA10025
ATA10065
BGM0000
BGM00059
DATA with
Strips are:
846-26-700
846-26-800
846-26-900

The topbox LCD must have at least 48MB of RAM memory installed.
Thanks to all those that helped via PM messaging and emails!