Reel 3 tilt issue

[br549autosales]

Having reel tilts on almost every spin on the 3rd reel. Even when I swap reels around I still am getting a reel 3 tilt error. What can I check for in order to resolve this issue? There is nothing blocking any of the reels when they are spinning.

[dailey]

I enlarged the font.
Having reel tilts on almost every spin on the 3rd reel. Even when I swap reels around I still am getting a reel 3 tilt error. What can I check for in order to resolve this issue? There is nothing blocking any of the reels when they are spinning.

[lookes]

Check for pins pushed out on the reel shelf connector for reel 3.
Check for bent pins on the MPU long connector.
Check that the reel cable is fully seated on the motherboard.


All with the power off of course.

[br549autosales]

I don't know why my description of my reel tilt wasn't showing up but I did check the pins on the reel harness & they were fine. Someone said to try another MPU so I did & now it's working fine

[Trisail]

Just an FYI.  You can probably fix the bad MPU board with the #3 reel tilt by re-soldering the edge connector pins on the board.

Check this post out if you would like some more info.

http://newlifegames.com/nlg/index.php?topic=32159.msg171237#msg171237

Tony