Author Topic: What colour are the cashbox door wires please? (Read 3165 times)

Myfairlady · « **on:** January 14, 2022, 06:25:14 pm »

Hi. I have nothing but a plug with 10 colored wires and I have a door open b. I need to bypass 2 wires. What colors are they please? Thank you

Tilt · « **Reply #1 on:** January 14, 2022, 06:58:01 pm »

Blue with gray tracer and solid green.

Myfairlady · « **Reply #2 on:** January 15, 2022, 12:07:51 am »

Thanks , I will try that and report back.

Myfairlady · « **Reply #3 on:** January 15, 2022, 02:15:10 am »

Hi. No effectâ€¦ to be continued

Myfairlady · « **Reply #4 on:** January 15, 2022, 05:58:34 am »

Here are the wires

Tilt · « **Reply #5 on:** January 15, 2022, 08:49:15 am »

That's the 15 pin connector that plugs into the bottom of the bill validator housing correct? It's easiest to bypass it at the switch. Pull the two wires off the switch in the picture and connect them together. That should do it.

Myfairlady · « **Reply #6 on:** January 15, 2022, 10:03:23 am »

Thanks for the pic. You mean I should bypass the yellow and the blue?

Tilt · « **Reply #7 on:** January 15, 2022, 11:04:40 am »

It's actually supposed to be green, but looks more yellow.

Just remove them from the switch, cut off the connectors, strip some insulation, twist (or solder) the wires together, then put a wire nut or electrical tape over it and the Door Open B should go away.

Myfairlady · « **Reply #8 on:** January 15, 2022, 11:14:05 am »

I actually only have the plug you can see on the picture, the casino attendant took everything away. So I have no wires connected to a switch. I would not want to fry anything in the machine. I have one yellow wire and greens as well. My idea was to disable the bv in the option as I have no bill acceptor installed, would that clear the tilt?

Tilt · « **Reply #9 on:** January 15, 2022, 11:23:10 am »

Are you saying that you don't have a housing for the bill validator? Can you post a picture of the interior of the machine?

Unfortunately disabling the BV in software won't clear the error.

Myfairlady · « **Reply #10 on:** January 15, 2022, 11:24:56 am »

All I have the plug you can see. Everything was taken away. I will post when I am back home.

Tilt · « **Reply #11 on:** January 15, 2022, 11:30:00 am »

OK. Does it have a coin acceptor or TITO board installed so you can put credits on the machine then?

Myfairlady · « **Reply #12 on:** January 15, 2022, 11:33:41 am »

A coin acceptor only. Machine complete.

Tilt · « **Reply #13 on:** January 15, 2022, 11:46:06 am »

OK. Cut the Blue/Gray and Green wires shown in this photo and tie them together (on the side going back to the machine). That should clear your door error message.

Myfairlady · « **Reply #14 on:** January 15, 2022, 01:40:59 pm »

I have tied all the green ones to the blue and it stopped the machine

Myfairlady · « **Reply #15 on:** January 15, 2022, 01:45:45 pm »

Blue/grey and green together give a Touchscreen failure

Tilt · « **Reply #16 on:** January 15, 2022, 01:47:55 pm »

Oh no. Only tie the two I identified together. Take the rest of them back apart and hopefully it didn't damage anything else.

The green wire that goes to the Blue/Gray wire is SOLID green (no tracer). All the other green wires have a colored tracer. Take those pack apart.

Myfairlady · « **Reply #17 on:** January 15, 2022, 02:03:11 pm »

I have done as explained but still Door open B

Tilt · « **Reply #18 on:** January 15, 2022, 02:08:35 pm »

Do you have/know how to use a multimeter?

Myfairlady · « **Reply #19 on:** January 15, 2022, 02:24:47 pm »

I tried in the other machine coming from the same place and your method worked i. So tomorrow, I will try to trace where there is something wrong in the other machine. Thank you for your help and patience. I will post when the problem is located and solved.

News:

NLG Site Navigation Menu

Author Topic: What colour are the cashbox door wires please? (Read 3165 times)