Igt S+ Red, White and Blue Wild Autoplay problem

[Doggz2000]

I just pick up the machine. It was a Nickels machine, changed it to Quarters. With credits on machine. When I push “Bet One” it sometimes plays without touching anything else. Also sometimes if I hit “Bet One” and then hit “Spin Reels” it won’t play, but if I pull the handle it will play.
I’ve check the micro switch, traced the wires from the button to the mpu. Tested fine. I’ve Unplugged the “Bet One” button and it still does it.

Could this be a board issue or maybe settings? I don’t think it’s a wire issue unless I’m missing something

[Stayouttadabunker]

You have something messed up.
You mentioned nothing about the "Max" bet button?

Post CLEAR pictures of all the button microswitches and their wiring connections.
Show us how you plugged it back together and we'll tell you if you have a "wiring issue" or not.

[Doggz2000]

“Max button “ works fine
This problem is sporadic, it will play fine then all of a sudden, it’s plays when you hit “Bet One”
Also it was doing this before I unplugged anything
I checked my other S+ and the wiring is the same

[Doggz2000]

Hopefully I’m not getting ahead of myself, but I think I solved the problem.
I remember reading on here that the handle is in series with the “Spin Reels”
Took apart the handle mechanism, the NC contact was was close to a part on the mechanism. Bent the NC tab away from the part. Put everything back together, plays perfectly
There is a offshore BV in here so maybe when they installed that they bent the tab

Maybe this will help somebody someday

[knagl]

Good detective work, and thank you for posting the resolution to your issue -- as you said, it may help someone in the future.