error 32

[61Wally]

Great Day to All. I replaced battery after 88ff & then ram clear, 31 code appeared. Repaired hopper connector. Machine played for 5 minutes, Now 32 error appears. Any advice clearing? I checked voltages on chips-OK.

[Sunrise Side]

32 - Hopper empty

[61Wally]

WOW, That’s wired because it only has the hopper “bypass” plug in the socket. Maybe when I Ram Cleared it the machine reverted back to having a hopper in it. I will check the 11d settings when I go back to her house.

[61Wally]

UPDATE, What I found out that triggered this after playing, The .25 cent machine had just had $150 put in it. So after having 600 credits on the meter, She played and hit a jackpot large enough to exceed the 800 credit limit and force the rest into a payout. NOT having the hopper to support this it went into a lockup mode. Just thinking of the best way of changing this issue. ? for anyone that might shed some help on this, If I changed 61 on 11d to 0002 (printer only) would that just allow a reset key? It’s programmed now for 0001 (hopper only) with a jumper connector in the hopper socket.

[Sunrise Side]

Yes change it to 002 printer only and increase the credit limit to 8000

[61Wally]

Thank You Sir, Just an FYI, This machine I just did that and they are HAPPY HAPPY to have it going again. They even gave me their printer and all the cables so I can finish mine. I will call You when I mess it up!!!

[61Wally]

GOT IT, The bypass printer plug had a bad connection replaced working great.