Best way to upgrade WBA-10 for IGT S+

[TNTTRX]

Hi all,

This is my first S+ but it's not taking anything besides certain $1 and $20 bills.  Is there a way to buy something that would drop right in?  Or is there anything that can be done with this WBA-10 to make it take other bills? 

Thanks!

[rickhunter]

You may not even have a WBA 10.  Pull the validator out and take a photo of the rear connector.  If you do have a WBA 10, the newest software can take up to colored $10's and all others before it ($20's, and $50's, but not $100's and $5's).  It has one way acceptance, which means bill must be inserted face up and top of head to the right. If you want 4-way acceptance you will need a WBA12/13 transport plus the harness on the rear of the validator cage must be changed.  The newest WBA 1213 firmware for the S+ will take up to new $5's but no new $100's.

[TNTTRX]

You may not even have a WBA 10.  Pull the validator out and take a photo of the rear connector.  If you do have a WBA 10, the newest software can take up to colored $10's and all others before it ($20's, and $50's, but not $100's and $5's).  It has one way acceptance, which means bill must be inserted face up and top of head to the right. If you want 4-way acceptance you will need a WBA12/13 transport plus the harness on the rear of the validator cage must be changed.  The newest WBA 1213 firmware for the S+ will take up to new $5's but no new $100's.

Here are a few pictures.  Let me know what you think, thanks!

[Stayouttadabunker]

The label on the chip body says "NEW WBA 11"...